MALE CONNECTORS, PITCH 1.27mm

(The way to build Your custom part number)

Characteristic:                                  [DIMENSIONS]

Look at the drawing of connector You need, then follow the instructions You will find beside the drawing.

The dimensions A, B, C and, where requested, D must be written in mm unit (max two decimal values).  

Click on the icon of the desired connector or scroll the page to watch each option:

 Hereunder You can find the details of each connector:

Write A, B and C needed dimensions.

With respect to height of the insulator (C)

the following options are available:

C = 1,0 (square pin 0.40mm side)

C = 1,5 (square pin 0,40mm side)

C = 2,5 (square pin 0,40mm or 0,46mm side)  *

C = 1,7 (square pin 0,46mm side)

* please write in the "notes" field of the form which kind of pin do You need

As soon as our Technical Department receives the form correctly filled in,

it will be our care to answer and to send You the technical drawing with all specifications.

       UP                                                                                      

Write A, B and C needed dimensions.

With respect to dimension  C

the following options are available:

C = 1,5 (insulator height 1.00 mm, square pin 0.40mm side)

C = 2,0 (insulator height 1.50 mm, square pin 0.40mm side)

C = 3,0 (insulator height 2.50 mm, square pin 0.40mm or 0.46mm side) *

C = 2,2 (insulator height 1.70 mm, square pin 0.46mm side)

   * please write in the "notes" field of the form which kind of pin do You need

The C dimension can change following Your needs:

if You write a C dimension different from the standard above described, please in the "notes" field of the form write also the desired height of the insulator and the section of the pin (0,40x0,40mm it is possible with 1,0mm, 1,5mm and 2,5mm height insulators and 0,46x0,46mm it is possible with 1,7mm and 2,5mm height insulators).

The standard dimension for B is 5.00mm: on demand it is possible to change this dimension too.

As soon as our Technical Department receives the form correctly filled in,

it will be our care to answer and to send You the technical drawing with all specifications.

       UP                                                                                      

Write A, B and C needed dimensions.

With respect to dimension  C  the following options are available:

C = 1,5 (insulator height 1.00 mm, square pin 0.40mm side)

C = 2,0 (insulator height 1.50 mm, square pin 0.40mm side)

C = 3,0 (insulator height 2.50 mm, square pin 0.40mm side)

C = 2,2 (insulator height 1.70 mm, square pin 0.46mm side)

C = 2,9 (insulator height 2.50 mm, square pin 0.46mm side)

The C dimension can change following Your needs:

if You write a C dimension different from the standard above described, please in the "notes" field of the form write also the desired height of the insulator and the section of the pin (0,40x0,40mm it is possible with 1,0mm, 1,5mm and 2,5mm height insulators and 0,46x0,46mm it is possible with 1,7mm and 2,5mm height insulators).

As soon as our Technical Department receives the form correctly filled in,

it will be our care to answer and to send You the technical drawing with all specifications.

       UP                                                                                      

Write A, B, C and D needed dimensions.

With respect to height of the insulator (C)

the following options are available:

C = 1,0 (square pin 0.40mm side)

C = 1,5 (square pin 0,40mm side)

C = 2,5 (square pin 0,40mm or 0,46mm side)  *

C = 1,7 (square pin 0,46mm side)

* please write in the "notes" field of the form which kind of pin do You need

As soon as our Technical Department receives the form correctly filled in,

it will be our care to answer and to send You the technical drawing with all specifications.

       UP                                                                                      

Write A, B, C and D needed dimensions.

With respect to height of the insulator (C)

the following options are available:

C = 1,0 (square pin 0.40mm side)

C = 1,5 (square pin 0,40mm side)

C = 2,5 (square pin 0,40mm or 0,46mm side)  *

C = 1,7 (square pin 0,46mm side)

* please write in the "notes" field of the form which kind of pin do You need

The standard dimension for B is 5.00mm

As soon as our Technical Department receives the form correctly filled in,

it will be our care to answer and to send You the technical drawing with all specifications.

       UP                                                                                      

Write A, B and C needed dimensions.

With respect to height of the insulator (C) the following options are available:

C = 1,0

C = 1,5

C = 1,7

C = 2,0

C = 2,5

The pin is always square 0.40mm side

As soon as our Technical Department receives the form correctly filled in,

it will be our care to answer and to send You the technical drawing with all specifications.

       UP                                                                                      

Write A, B and C needed dimensions.

With respect to dimension  C  the following options are available:

C = 1,5 (insulator height 1.00 mm, square pin 0.40mm side)

C = 2,0 (insulator height 1.50 mm, square pin 0.40mm side)

C = 2,2 (insulator height 1.70 mm, square pin 0.40mm side)

C = 2,5 (insulator height 2.00 mm, square pin 0.40mm side)

C = 3,0 (insulator height 2.50 mm, square pin 0.40mm side)

The C dimension can change following Your needs:

if You write a C dimension different from the standard above described, please in the "notes" field of the form write also the desired height of the insulator.

The standard dimension for B is 5.50mm: on demand it is possible to change this dimension too.

As soon as our Technical Department receives the form correctly filled in,

it will be our care to answer and to send You the technical drawing with all specifications.

       UP                                                                                      

Write A, B and C needed dimensions.

With respect to height of the insulator (C) the following options are available:

C = 1,5 (insulator height 1.00 mm, square pin 0.40mm side)

C = 2,0 (insulator height 1.50 mm, square pin 0.40mm side)

C = 2,2 (insulator height 1.70 mm, square pin 0.40mm side)

C = 2,5 (insulator height 2.00 mm, square pin 0.40mm side)

C = 3,0 (insulator height 2.50 mm, square pin 0.40mm side)

The C dimension can change following Your needs:

if You write a C dimension different from the standard above described, please in the "notes" field of the form write also the desired height of the insulator.

As soon as our Technical Department receives the form correctly filled in,

it will be our care to answer and to send You the technical drawing with all specifications.

       UP                                                                                      

Write A, B, C and D needed dimensions.

With respect to height of the insulator (C)

the following options are available:

C = 1,0 (square pin 0.40mm side)

C = 1,5 (square pin 0,40mm side)

C = 1,7 (square pin 0,40mm side) 

C = 2,0 (square pin 0,40mm side)

C = 2,5 (square pin 0,40mm side)

As soon as our Technical Department receives the form correctly filled in,

it will be our care to answer and to send You the technical drawing with all specifications.

       UP                                                                                      

Write A, B, C and D needed dimensions.

With respect to height of the insulator (C)

the following options are available:

C = 1,0

C = 1.5

C = 1.7

C = 2,0

C = 2,5

The pin is always square 0.40mm side

The standard dimension for B is 5.50mm.

As soon as our Technical Department receives the form correctly filled in,

it will be our care to answer and to send You the technical drawing with all specifications.

       UP                                                                                      

We are able to supply a wide range of female connectors which mate with the male connectors above shown.  Please contact our Technical Dept. to be carefully supported in finding the best connector for Your needs. 

Since it is impossible to produce only few pins with the desired plating, samplings will be supplied with the pins' plating available at the moment of request.